Temperature Products
Connector Probes
Electrical Element Heating
Elements
Fiber Optic Backlight Source
Fine Gauge Thermocouples
Fixed Mount Infrared
Fixed Mount
Flexable Element Heating
Handheld RTD's
Handheld Thermistors
Handheld Thermocouples
Handheld Thermometers
Heat Jackets
Heat Trace
High Temp Thermocouples
Hightemp Blackbody Calibrators
Industrial RTDs
Industrial Thermocouples
Leadwire Attached RTDs
Leadwire Thermocouples
Non-Contact Infra Red
Probes
Ready Made Thermocouples
RTD's
Sanitary
Surafce Mount RTDs
Surface Mount Thermocouples
Thermowells
Transmitters
Leadwire Attached RTDs
Wire Thermistors
Wire Thermocouples
Temperature Transmitters
Temperature transmitters are used to convert the primary sensing signal, usually a resistance change for RTD sensors or EMF for thermocouples, into a standard current signal of 4-20mA. We offer a comprehensive range of temperature transmitters suitable for thermocouples or platinum resistance thermometers (RTD), these transmitters may be either head or rack mounted. Temperature ranges may be factory set or user adjusted. (Programmable, intrinsically safe, Hart', Profibus° and Foundation Fieldbus" communication versions are available).
Mineral Insulated Thermocouples
A Thermocouple consists of two electrical conductors of dissimilar material connected at one end the hot junction), the two free ends are connected to the measuring instrument via a reference junction (the cold junction). The connection of these two materials provides an electromotive force (emf).
Mineral Insulated Resistance Thermometers
A Resistance Thermometer is a temperature sensor constructed from resistance wire wound into an element. It is used to measure temperature by meals of a change in the electrical resistance with a rise or fall in temperature. The most popular wire used in Resistance Thermometers is platinum, although nickel or copper can also be used.
Lagging Extensions
Lagging extensions are available in a wide range of lengths, sites and fittings. Materials include Carbon Steel and Stainless Steel. They allow the connection head to be positioned away from the heat source, or through insulating lagging. Nipple/Union/Nipple and Breakaway couplings allow rapid disconnection for testing, and orientation.
Thermowells
Thermowells are used extensively in the powers process, pharmaceutical and petrochemical industries. They are used to protect temperature indicators and sensors from process media and enable servicing or replacement of sensors without the need to shut down plant.
Thermowells are precision made to the highest standards of finish in our modern well equipped machine shop and are manufactured to high quality standards approved to BS EN ISO 9001.
Thermowells are available fabricated from tube or drilled from barstock or forgings, full material certification, including original mill and suppliers materials certificates can be provided. If required NACE standard MR-01r7S requirements can be met.
Our custom-design ability puts us ahead of the competition for providing thermowells. As part of an assembly or as a replacement, we can provide thermowells of any size, material and specification. As part of our solution we can also offer stress and frequency calculations to ensure you have the correct design for the job.